Hall Of Fame


This page chronicles some of the iconic pieces we have sold over the years, sorted by the most recent at the top.


Star Trek II: The Wrath of Khan

Starfleet Spacesuit

This incredible space suit was custom-made by the production for use in "Star Trek: The Motion Picture" and re-used in "Star Trek II: The Wrath of Khan". The costume consists of a brown, orange and white jumpsuit, a pair of matching gloves and the iconic back and chest space pack. The jumpsuit features ribbed detailing at the knees, elbows, chest and waist and has rubber and plastic components attached to the arms, gloves and legs and has no name written inside. The gloves have "Morga" written in marker on the inside. The back/chest space pack has "Kirk" written on the inside and was one of the two made for the first film for use by William Shatner as "Captain Kirk" and re-painted and fitted with the special handle at the neck for use presumably by Paul Winfield as "Terrell" in "Star Trek II: The Wrath of Khan". The space pack is fitted with a harness and internal wiring that is untested. The connecting brackets are missing and the pack has wear from use and storage, but remains in very good condition.

Sold in the ScreenUsed Summer Auction - July 12, 2014


Click

Light-Up Remote Control (Adam Sandler)

This "hero" light-up universal remote control was custom-made by the production for use by Adam Sandler as "Michael Newman". Detailed with fake buttons and a perfect "metal finish" paint job, this is the iconic prop from the film, and can be seen throughout the film from the time Michael receives it as a gift from Morty at Bed, Bath and Beyond to the very end of the film. This particular remote was fitted with an internal lighting system that is connected by wire that runs to a control box. This remote was used for close-up shots of the remote lighting up, simulating Michael pressing the various buttons, as the control box was operated by a stage hand. The large white display area lights up as well, but the graphics seen within that area was added in post production.

Sold in the ScreenUsed Summer Auction - July 12, 2014


Indiana Jones and the Temple of Doom

Sankara Stone

This is an oblong stone, cast in resin and painted brown to resemble the rare Sankara stone, with three semicircular lines scored around the center. This is the static version of the Sankara Stone, as opposed to the hero illuminated version, which was only used for a few special effects shots. Measures approximately 6" tall x 3" diameter.

Sold in the ScreenUsed Summer Auction - July 12, 2014


Edward Scissorhands

Kim's White Dress (Winona Ryder)

This dress was acquired by the production for use by Winona Ryder as "Kim". The knee length dress features a sheer overlay with large buckle attached to the collar and buttons down the front. This is an iconic costume piece from the now classic Tim Burton film. Wear from use is present.

Sold in the ScreenUsed Summer Auction - July 12, 2014


Star Trek: The Motion Picture

Captain James T. Kirk's Starfleet Uniform (William Shatner)

This Starfleet uniform was custom-made by Western Costume Company for use by William Shatner as "Captain James T. Kirk". The instantly recognizable uniform consists of a tunic, with Starfleet insignia patch, sleeve rank braid and "Bio Monitor" belt detail, and a pair of pants with attached boots. Both the tunic and pants feature original Western Costume Company labels with "William Shatner" typed on the information line, along with the reference number "2240-I", confirming the costumes use by William Shatner. Shatner wears similar style long-sleeve grey uniforms in the film, however this particular costume can be screen-matched to a sequence early in the film. The biggest tell is the Starfleet insignia patch, which has stitching and bordering that match exactly to high definition stills from the film. This is an incredible opportunity to own a screen used Star Trek: The Motion Picture Captain Kirk costume, that may be the finest example surviving today.

Sold in April 2014


X2: X-Men United

Wolverine's Adamantium Claws (Hugh Jackman)

This pair of "Adamantium Claws" were custom-made by the production for use by Hugh Jackman as "Logan / Wolverine". The claws are made from resin, with cast-in-place metal posts that are attached to the base grips. The single most iconic props from the X-Men series, these each measure approximately 10.5" in length. In addition to our ScreenUsed COA, this set of Adamantium Claws come with a letter from X-Men 2 associate producer David Gorder confirming their use during filming.

Sold in the ScreenUsed Spring Auction - March 15, 2014


Breaking Bad (TV)

Walter White's Hazmat Suit with Gas Mask (Bryan Cranston)

This "costume" Hazmat Suit was acquired by the production for use by Bryan Cranston as "Walter White" in various episodes of season four. The outfit consists of a custom-made one piece yellow jumpsuit with attached hood, a pair of yellow over the shoe rubber boots, a 3M gas mask and a pair of blue rubber gloves. The suits were custom-made as the "real" Tyvek suits used early in the production were too hot for the actors and also made too much noise during filming. The custom-made versions like this solved the problems and were used throughout the production. This is the single most recognizable artifact from the entire series and a must have for any serious collector; as far as we know, this is the only complete Hazmat Suit to come to auction. Along with our ScreenUsed COA, this outfit comes with Sony Pictures COAs confirming its use during filming.

Sold in the ScreenUsed Spring Auction - March 15, 2014


Charlie and the Chocolate Factory

Willy Wonka's Cane (Johnny Depp)

This walking cane is one of only a few canes commissioned by set designer Peter Young for use by Johnny Depp as "Willy Wonka". It measures 39.25" long and features a tapered, hollow spiral shaft filled with real edible sprinkles, a pointed black resin tip with aluminum trim rings, and spiral black and white acrylic ball head with aluminum and resin collar. This cane was acquired directly from a family member of Peter Young.

Sold in the ScreenUsed Spring Auction - March 15, 2014


Corpse Bride

Skeleton Puppet

This is a wonderful stop-motion puppet of a bare skeleton character from this modern Tim Burton classic. The puppet stands approximately 17" tall and is built of a steel and aluminum armature with hand-painted resin-for-bone skeleton with rubber covered hands, feet and backbone (big toe on left foot is missing). Complete stop-motion puppets from Corpse Bride are exceedingly difficult to obtain.

Sold in the ScreenUsed Spring Auction - March 15, 2014


Terminator 2: Judgment Day

T-800 Harley-Davidson (Arnold Schwarzenegger)

This is one of a few bikes used by the T-800 (Arnold Schwarzenegger) during filming of the movie. Arnold and the bike are always instantly recognizable as the keys to the Terminator 2 movie. This particular bike matches up in several of the scenes - especially the shape and wrinkles in the saddle bags. There is a custom bar mounted on the front of the frame which used to have footpegs. This was installed so that John Conner (Edward Furlong) had a place to put his feet when he was riding on the gas tank. The gas tank has many scratches and marks on it, presumably from the various takes of John Conner being pulled on to it from his bike. The bike was acquired directly from the studio and is complete with a copy of the ownership paperwork stating "T2 Productions", along with an original signed bill of sale and letter of authenticity from Mario Kassar, Executive Producer of T2. The bike was never registered, and is currently in stored non-running condition, though kept in exact shape as acquired years ago.

Sold to the Harley-Davidson Museum in Milwaukee, WI - February, 2014


Star Wars: Episode II - Attack of the Clones

Obi-Wan Kenobi's Metal Lightsaber

This metal Lightsaber was custom-made by the production for use by Ewan McGregor as "Obi-Wan Kenobi". This is the saber used by Obi-Wan in the arena sequence right through to the fight with Count Dooku in his secret lair. The Lightsaber is constructed of machined metal with various plastic add-on components. Measures 9.75" in length.

Sold in the ScreenUsed Fall Auction - November 2, 2013


X-Men Origins: Wolverine

Wolverine's Adamantium Claws (Hugh Jackman)

This pair of "Adamantium Claws" were custom-made by the production for use by Hugh Jackman as "Logan / Wolverine". The claws are made from resin, with cast-in-place metal posts that are attached to the base grips. The single most iconic props from the X-Men series, these each measure approximately 10.5" in length.

Sold in the ScreenUsed Fall Auction - November 2, 2013


Evil Dead 2: Dead by Dawn

Book Of The Dead Page (Vortex)

This page from the Necronomicon was custom-made by the film's animator, Tom Sullivan, for use by various actors including Bruce Campbell, who played the hero, "Ash". This page features the drawing of the Vortex and the passage to close it. Each page from the Necronomicon was aged and weathered for filming, making each page unique. This page features markings that match exactly on screen. Tom Sullivan has hand signed the page in the bottom left corner after filming was complete.

Sold in the ScreenUsed Fall Auction - November 2, 2013


Raiders of the Lost Ark

Idol Temple Wall Tile

This wall tile was custom-made by the production for use as set dressing in the Idol Temple set. The wall tile is constructed of plaster and distressed to give it a well worn look. Four holes in the center are in place for stage hands to launch poison arrows during filming. Measures 15" x 15" x 3.5".

Sold in the ScreenUsed Fall Auction - November 2, 2013


X-Men Origins: Wolverine

Wolverine's Bone Claws (Hugh Jackman)

This pair of "Bone Claws" were custom-made by the production for use by Hugh Jackman as "Logan / Wolverine". The claws are made from resin and painted to look like bone, with cast-in-place metal posts that are attached to the base grips. These very iconic props each measure approximately 9.5" in length.

Sold in the ScreenUsed Fall Auction - November 2, 2013


Jack Reacher

Jack Reacher's Jacket (Tom Cruise)

This jacket was acquired by the production for use by Tom Cruise as the film's title character "Jack Reacher". The leather jacket is slightly distressed for filming and features some unique marking that match exactly on screen during the final scenes following the quarry scene.

Sold in the ScreenUsed Fall Auction - November 2, 2013


Captain America: The First Avenger

Captain America's Shield (Chris Evans)

This is Captain America's stunt shield, custom-made for use during action and stunts while filming. The shield features advanced studio distressing to simulate use through all the key battle scenes. It is constructed of hard polyurethane rubber with airbrushed darkened patina, scoring and scuffing and measures 24" in diameter. This is the single most iconic superhero prop in history and would be the stand-out piece in any collection.

Sold in the ScreenUsed Summer Auction - July 6, 2013


Nightmare on Elm Street, A (2010)

Freddy's Razor Glove (Jackie Earle Haley)

This razor glove was custom-made by the production for use by Jackie Earle Haley as "Freddy Krueger". The legendary weapon is made from a leather glove with metal blades and brace sections, and it is the hero version of the prop.

Sold in the ScreenUsed Summer Auction - July 6, 2013


Blade Runner

Blade Runner Blaster

During the production of Blade Runner there was only one hero metal blaster created for use by Harrison Ford as "Rick Deckard". However, several rubber stunt blasters were made from a mold of the hero blaster. The stunt blasters were used in at least the following scenes, potentially more:

  • When Leon and Deckard are fighting in the street
  • When Batty reached through the wall and grabs Deckard's hand with the blaster
  • When Deckard and Batty are fighting in Sebastian's apartment

In addition to Deckard using this style blaster, there are production images that show Holden had a similar style, as well as some of the police officers. Most police officers were believed to have completely black colored blasters, however one picture in particular shows a police officer with what looks like a brown colored handle.


Sold in the ScreenUsed Spring Auction - March 9, 2013


Blade Runner

Deckard's Shirt (Harrison Ford)

This shirt was custom made by the production for use by Harrison Ford as "Rick Deckard". This shirt can be seen in the scenes when he is hunting down Zhora, and eventually shoots her. He continues to wear it until he removes the shirt in his kitchen.

Sold in the ScreenUsed Spring Auction - March 9, 2013


Jaws

Quint's Machete (Robert Shaw) and Hooper's Dive Mask (Richard Dreyfuss)

This machete was acquired by the production for use by Robert Shaw as "Quint". The machete has a metal blade with wood handle and measures 20.5" in length. The machete was part of the private collection of Lynn Murphy (boat wrangler on the film) and was given by Murphy in 1995 to Michael Roddy who produced the Jaws documentary titled, "The Shark Is Still Working" for the 30th anniversary DVD release of Jaws. In the past, the machete was cleaned of rust on the blade and was then displayed in a shadowbox with a still from the film. The machete remains in good condition and is one of very few artifacts that survived from filming.

This dive mask was acquired by the production for use by Richard Dreyfuss as "Hooper". The dive mask is a wrap around style with metal trim and tempered glass. The head strap has dry-rotted and broken off, but the mask itself remains in good condition. The mask was part of the collection of Michael Roddy who produced the Jaws documentary titled, "The Shark Is Still Working" for the 30th anniversary DVD release of Jaws.

Sold in the ScreenUsed Spring Auction - March 9, 2013


Rambo

John Rambo's Outfit (Sylvester Stallone)

(Lionsgate 2008) This outfit was acquired by the production for use by Sylvester Stallone as "John Rambo". This is his main outfit through the second half of the movie. The outfit consists of a studio distressed short sleeve shirt and cargo pants. Both the shirt and pants have "41" stitched inside by the costume department.

Sold in the ScreenUsed Spring Auction - March 9, 2013


Star Wars: Episode V - The Empire Strikes Back

Production Used Clapperboard

This clapperboard was used during filming of The Empire Strikes Back and is from the "A" camera. This board was used by the 2nd AC (Assistant Camera) throughout the production. The piece shows signs of heavy use and still features markings from its final shot from the film. Production used items such as this clapperboard are very rare sought after artifacts of Star Wars history.

Sold in the ScreenUsed Fall Auction - November 3, 2012


Hellboy II: The Golden Army

Wink Costume

This incredible costume was custom made for the production for use by Brian Steele as "Wink". Wink is one of the amazing creatures straight from the creative forces of Director, Guillermo del Toro and his talented crew of designers and artisans. The Wink costume stands over seven feet tall and consists of thirteen components that blend together bringing the over-sized creature to life. Made of various materials including resin, plastic and foam, this is the stunt version with a static head. Although this is the "stunt" version, the costume is incredibly detailed and remains in very good condition, with only minor wear from use, including a few missing quills from the back. The large spike located at the back of his artificial forearm is detached and would need to be reattached, however these minor issues do not take away from the look of the piece. This very durable costume looks breathtaking on display and would be the centerpiece to even the most advanced collection. The head was made during production and may not have been used during filming.

Sold in the ScreenUsed Fall Auction - November 3, 2012


Talladega Nights: The Ballad of Ricky Bobby

Ricky Bobby's Racing Suit (Will Ferrell)

Box quilted racing suit made by Sparco in size 60 worn by Will Ferrell as "Ricky Bobby." Includes Ferrell's Wonder Bread #26 baseball hat and Puma shoes, size 11.5 US. This is the signature Wonderbread suit, with Nextel Cup patch at his upper right. "Ricky 1" is handwritten into the interior collar and "Ricky" is written on the inside of the hat. Included with the suit is the production used costume tag that details the costume and scenes the suit was used.

Sold in the ScreenUsed Fall Auction - November 3, 2012


The Shining

Production Used Clapperboard

This clapperboard was used during filming of the Shining. This is the "A" camera board and was used by the 2nd AC (Assistant Camera) throughout the production. The clapperboard shows signs of heavy use and still has markings of its final shot during the production. A extremely rare artifact from the classic film from director Stanley Kubrick.

Sold in the ScreenUsed Fall Auction - November 3, 2012


The Rocketeer

Rocketeer Helmet

This helmet was custom-made for the production for use by Bill Campbell as Cliff Secord/The Rocketeer. The helmet is made of slush cast resin with a weathered copper finish, padded interior and chinstrap. This particular helmet features special distressing to the top of the fin and left temple over the eye lens. The fin and helmet is intentionally dented as if the helmet was grazed by a bullet. This helmet can be seen on-screen during the scene when Cliff meets Neville Sinclair (Timothy Dalton) at the Griffith Observatory to trade the jet pack for Jenny (Jennifer Connelly), making this a unique screen-matched helmet. The helmet is presented on a custom acrylic base for display.

Sold in the ScreenUsed Summer Auction - July 21, 2012


Star Wars: Episode VI - Return of the Jedi

Blue Harvest Clapper Board

This is a "Blue Harvest" clapperboard used during filming of Return of the Jedi location filming. The piece shows signs of heavy use and still featuring markings from its final shot. Items from Return of the Jedi that feature the false title "Blue Harvest" are very rare sought after pieces of Star Wars history. The false film title "Blue Harvest" was used during the early production stages of filming Return of the Jedi and this would be the most sought after "Blue harvest" production artifact for collectors. This exact clapper board can be seen in behind the scenes footage on the DVD, with screen matching marks and scratches.

Sold in the ScreenUsed Summer Auction - July 21, 2012


Back To The Future 2

Pit Bull Hoverboard

Probably the most recognized props from Back to the Future 2 are the hoverboards. There are five styles of hoverboards seen on screen during the filming - Mattel, Pit Bull, Rising Sun, No Tech, and Question Mark.

This hoverboard is the one that Griff (Thomas Wilson) uses to pull his three gang members over the water in the town square. It is by far the rarest of the hoverboards to obtain. It is also the largest and heaviest when made of wood. One of the toughest details to find on a Pit Bull is the thrusters - the two small engines under the back. Like the footpads, there was a limited number of these created, so they were moved from board to board as the Pit Bull was replaced due to damage.

There were several of each hoverboard created from either wood or styrofoam, depending on if the actors were carrying it, flying, or doing a stunt. This particular board is made of wood and has two holes in it, at two diagonal positions. Those holes were used to mount the metal cables that hung from the cranes.

This is the coolest of all the hoverboards, and can be the centerpiece of a Back to the Future collection.

Sold in March 2012


Star Wars: Episode V - The Empire Strikes Back

Darth Vader Helmet

This is an incredibly rare and extremely recognizable piece. This original screen used Darth Vader helmet looks amazing with the clear cast face mask that was made for display.

The helmet was acquired from a Special Effects person who had it for approximately 10 years. Prior to that, he had purchased it from another Special Effects person who obtained it from a stage hand after the helmet received a blow during the saber fight and only the top helmet part was exchanged (since the face was still intact). The helmet is very complete, and has a crack on the left side. The surface has several scratches, small cracks, and chips (note some in the middle of the brow) from screen use.

Sold in January 2012


Back To The Future 3

DeLorean Time Machine

This is one of seven DeLoreans used on screen in the Back to the Future trilogy. This particular car was used in the third movie for the 1955 drive-in movie scene when Michael J. Fox drives it into the past and lands in 1885 to find Doc. Of the seven DeLoreans, only three have survived since filming, and this is one of those three - the only one in private hands. The others are still owned by Universal Studios, and usually on display at the theme parks. For all the details, please visit the following website (opens in a new window): www.BTTF3delorean.com

Sold in December 2011


Terminator 2: Judgment Day

T-800 Jacket

This is one of the distressed leather jackets worn by Arnold Schwarzenegger as "The Terminator" throughout the movie. This particular jacket has a nice level of distress and bullet holes, and would have been used during the middle of the movie. Several jackets were created with various levels of distress from very clean all the way through to shredded at the end of the movie. The bullet holes on the back of this jacket look similar to the pattern seen when the Terminator is saving Sarah Connor at the hospital. As he runs to the elevator, the T-1000 is shooting at his back, and several "squibs" are remotely exploded to look like bullets hitting his back. The inside of the jacket shows remnants of where these squibs were attached, along with some red studio blood staining on the inside of the jacket.

Sold in August 2011


Spider-Man 2

Green Goblin's Mask

This mask was screen used at the end of the film when on display in Norman Osborn's (Willem Dafoe) secret room. A special mounting bracket was installed inside the helmet so it could be held in place on a pedestal. This mask may have also been used in the first film.

Designing the mask - Sam Raimi (Director), James Acheson (Costume Designer), and Neil Spisak (Production Designer) wanted to honor the look of the Goblin in relation to the comic books, however they also wanted to make it seem as though it came from the real world. James Acheson: "The Goblin looks slightly different than his comic book incarnation. We started off being very faithful in terms of the face, but that changed quite radically when we decided to give up on the idea of a prosthetic face." In the end, what they retained of the Goblin was a fixed maniacal screaming face, which in return became part mask and part and part helmet for the Goblin to ride on the rocket glider.

"The itsy bitsy spider went up the water spout, down came the GOBLIN and took the spider out!"

Sold in December 2010


Raiders of the Lost Ark

Indy's Fedora

This is the hero fedora worn by Harrison Ford as "Indiana Jones" throughout about 80% of the movie. There were a few other fedoras, however this one matches on screen the majority of the time. There are many very specific marks along with folds and loose threads in the ribbon and bow that are an exact match.

To see many of the matching screen captures, click on the following link (opens in a new window): Indy Fedora Details

Sold in October 2010


Viva Knievel!

Evel Knievel Leathers

Daredevil Evel Knievel stars as himself in this cult-classic 1970's adventure. Everything's warm and wonderful when the motorcycle king visits the orphanage, but danger awaits when he heads to Mexico to perform a death-defying stunt. An evil drug lord (Leslie Nielsen) plans to have Knievel killed and use his coffin to smuggle cocaine across the U.S. border. Evel stars as himself in the action film, during the height of his international fame.

This leather jumpsuit was custom made for filming and worn by Evel Knievel's stunt man Gary Davis (yes even dare devil legend Evel Knievel was required to have a stunt man during filming to protect him from harm until filming was complete) and can be seen early in the film during Evel's death-defying jump and crash. Although not worn by Evel on-screen, it is a 100% authentic Evel Knievel costume, down to the type & quality of leather, custom tailoring and extensive detail. And used on set, in the presence of Evel.

The leathers have the iconic Evel Knievel styling of sewn stars over red, white and blue accent stripes and is complete with the memorable "EK" belt buckle, "EK" patches on the cuffs and the "Harley-Davidson" patch on the left shoulder. "Gary" is written on both sides of the inside section of the zipper, for Gary Lee Davis, credited on the film. This is a very recognizable museum quality costume connected to the motorcycle legend, one of the most popular icons of the 20th century.

Sold in June 2010


Back To The Future 2

Jaws 19 Movie Poster

Artist: Tim Flattery

Year: 1989

Medium: Paint on illustration board with white lettering applied

Dimensions: 21.75" x 28.75"

This is both an original piece of artwork and a prop used during filming. It is very difficult to see, but this was posted in the window of the futuristic movie theater in the year 2015. This particular art has been searched for by fans of the movie for decades - and we now have it available directly from the artist. This image has been used in various Universal Studios material from the movie, including a small sized image of it on the back of the infamous Japanese Hollywood SFX Museum exhibition tour book. This is a one-of-a-kind, original piece.

Sold in January 2010


Freddy Vs. Jason

Freddy's Metal Razor Glove

This hero metal and leather razor glove was worn on screen by Robert Englund as "Freddy Krueger". The razor glove was custom made for filming and is detailed to look well used, yet stands today in perfect filming condition. Freddy's "Razor Glove" needs no introduction as it is the most iconic movie prop in horror film history and this is the one true "Holy Grail" for collectors of Freddy Krueger.

Sold in December 2009


Indiana Jones and the Temple of Doom

"Trust Him" Advance Key Art

Artist: Chris Hopkins

Year: 1984

Medium: Acrylic, ink, charcoal, photo base on board

Dimensions: 30" x 40"

This is the full-color, original painting, which became the legendary key art for the "Advance" - "Trust Him" movie poster one-sheet for the George Lucas produced & co-written and Steven Spielberg directed film "Indiana Jones and the Temple Of Doom" in 1984. Remarkably only the upper-half of the image was utilized to create the Advance one-sheet movie poster. But shown here is the full-size original painting, in all of it's glory, as rendered by the talented artist Chris Hopkins.

Hopkins was given just 10 days to complete this piece, which was created using original blown-up studio photographic-imagery, which was permanently applied to a piece of art-board, and then meticulously painted over with airbrush and acrylic mediums.

This memorable hand-rendered painting has been used as collateral art for a host of other Indiana Jones promotions, and is one of, if not the most iconic images of archaeologist, relic hunter, explorer, adventurer, and hero - Indiana Jones.

Sold in September 2009


Back To The Future 2

Mattel Hoverboard

Probably the most recognized props from Back to the Future 2 are the hoverboards. There are five styles of hoverboards seen on screen during the filming - Mattel, Pit Bull, Rising Sun, No Tech, and Question Mark. There is an additional orange Mattel hoverboard used by the other small child that was moving along the sidewalk with the little girl - however it is never seen on screen. There were several of each hoverboard created from either wood or styrofoam, depending on if the actors were carrying it, flying, or doing a stunt. The actors were rigged up with harnesses and swung from cranes over the water to give the illusion of flying.

This hoverboard is the one that Marty (Michael J. Fox) borrows from the little girl on the sidewalk. It was used throughout both Back to the Future 2 and 3. What is interesting about the Mattel hoverboard is that two different surfaces were created. Initially, a lenticular type material was used for the background color, which has a 3-D type look to it, with the other details hand applied. After a few of these were created, it was deemed more cost effective to create the more common "photo" Mattel hoverboard. The surface is a very detailed one to one picture of the original lenticular hoverboard surface.

Other details that are key to the Mattel boards are the footpads and the hole in the top for the handlebars. Many were created without the hole, assuming that detail may not be seen on screen. Additionally, in order to save costs, not all boards had a footpad. As filming progressed, hoverboards were scratched and broken, which led to them being literally thrown away. Before throwing them away, the footpad was removed and installed on another board.

This styrofoam lenticular Mattel hoverboard is very lightweight. It was used for shots of Michael J. Fox with the hoverboard screwed to his shoe, and was also used for shots of Michael handling the hoverboard.

Sold in June 2009


Star Wars: Episode VI - Return of the Jedi

Stormtrooper Helmet

This is one of the Stormtrooper helmets used during filming by one of the actors. As with all original Star Wars helmets, this is extremely rare to acquire. As can be seen, this one has seen it share of bumps and bangs over its history - and missing are the lenses that were used for the eyes (replaced with substitute lenses for display purposes).

Sold in May 2009


The Wild Wild West (TV)

James West Costume

The Wild Wild West ran for four seasons from 1965-1969, and featured the adventures of two Secret Service Agents working for President Ulysses S. Grant. The two men were James West (Robert Conrad), former Union soldier and current man-of-action, gunman, and womanizer. His partner was Artemus Gordon (Ross Martin), a former con man and master of disguise and invention. Together, the two fought various menaces aimed at the United States and President Grant, as well as investigating other Federal crimes. This is one of the costumes that Robert Conrad wore during the show as "James West". It is complete and contains the following items:

  • Jacket - This blue jacket is custom made for Robert Conrad with several very unique features. First, the right sleeve has a split going about halfway up, with hooks, a snap, and a strip of additional cloth sewn in. This was customized in order for Jim West to have his spring loaded pistol that would pop out of his sleeve and into his hand. Second, inside the back of the jacket is a cloth holder for a knife. Lastly, there is a small cloth holder under the lapel used for his lock pick. The jacket is in good condition for it's age but has some discoloration on the shoulders and sleeves as shown. This is not very visible when viewing from the front on a mannequin. The Western Costume tag on the inside of a pocket is labeled "Bob Conrad". It also has an American Costume stamp inside one sleeve.
  • Pants - This is a pair of custom made pants to match the jacket, with adjustable elastic stirrups on the bottom so they would fit appropriately. The Western Costume tag inside the pants states "Bob Conrad". It also has an American Costume stamp in the waistband.
  • Vest - The multi colored blue vest is in great condition with 6 brass colored buttons. The Western Costume label on the vest states "Bob Conrad". It also has an American Costume stamp under the lapel area.
  • Shirt - The light blue shirt has several stains on it and wear from production use. It has an American Costume stamp on the tail along with some writing on the bottom in black felt pen.
  • Ascot - This navy blue western tie with faint pink highlights is in good condition with an adjustable elastic strap for around the neck. We are not 100% sure of the ascot's use in the shows, but it was acquired from the studio with the outfit.

Sold in May 2009


Star Wars: Episode V - The Empire Strikes Back

Rebel Soldier Hoth Hat

This style hat was worn by various cast members and extras on the set of the hidden rebel base on Hoth. The hat is in overall good condition, showing signs of use on set with dirt marks and minor wear. This is an instantly recognizable costume piece from the incredible Hoth battle scenes. The hat is presented in a custom display case that measures 19.5" wide x 16.5" tall x 13" deep.

Sold in March 2009


The Rocketeer

Rocketeer Costume
This is a Rocketeer costume screen used during filming, and consists of the following pieces:
  • Helmet - This helmet was one of seven that were made by the crew during the production but eventually not used on screen. The foam padding has areas that are carved out where the ears would go. The leather chin straps are attached inside and are not removable.
  • Jetpack - This is a screen used jetpack made of fiberglass. It is lightweight and made for various distance or stunt shots. It has an eye-hole screw at the top used during filming. There are areas where some of the silver paint has chipped off and areas where there is some cracking along the exterior of the jetpack. For our photos of the costume we held the jet pack in place with a wire from the eye-hole as the harness that holds the jet pack in place is missing.
  • Jacket - This is a screen used jacket and is distressed with a tear in the back on the collar - potentially for stunt work. The jacket is marked "Deluna Fiberglass" inside the collar and has a couple of buttons missing. There is an area of discoloration on the left shoulder.
  • Trigger Gloves - This is a pair of screen used trigger gloves. The left and right trigger buttons are in working condition, however the right trigger button is missing the silver cover cap.
  • Pants - This pair of screen used overalls are beige. The bib is attached with buttons on the front. There is a tear in the crotch area and there is a black mark on the back of the right pant leg. Handwritten on the inside waist is "Deluna Fiberglass".
  • Boots - This pair of screen used boots are brown with some distressing done for the production or during filming. The back has been cut down the center and Velcro has been applied for easy application over the pants. There is a slit in the top and the sole of the both boots along the toe area. Handwritten on the inside of the left boot is the number "24970 10D" and in the right boot is the number "24971 10D".

Sold in March 2009


Rocky III

Rocky's Boxing Gloves

These are a pair of the gold boxing gloves that Sylvester Stallone wears as Rocky in the first fight with Clubber Lang. He also uses these in the infamous closing scene of the movie when he takes on Apollo Creed in the gym.

Sold in December 2008


Star Wars: Episode IV - A New Hope

Tie Fighter Pilot Helmet

This is one of 14 Tie Fighter Pilot helmets made for the first Star Wars movie in 1977. Even though only 14 were made, some may have been thrown out and some were reused for "The Empire Strikes Back" and "Return of the Jedi". Some were repainted white and used as AT-AT Driver helmets in "The Empire Strikes Back". The helmet was created at Andrew Ainsworth's Shepperton Design Studios in Feb/March of 1976, and comes with documentation from Mr. Ainsworth verifying it's authenticity.

The helmet has a very interesting history. The previous owner was about 9 years old when he accompanied his father to various filming sets in 1983. During another production, one of the crew members presented it to him. After receiving it, he wore it when playing with his friends, and thankfully was very careful with it in order to preserve its condition. Much older now, he has passed it on to our collection here.

Sold in December 2008


Army of Darkness

Ash's Costume and Evil Sheila's Dress
  • Ash's Costume - Screen used by Bruce Campbell as "Ash", this costume consists of his pants, belt, cape and clasp, and shirt. The shirt is in fact a mini Ash shirt that was screen used during the windmill scene. Very distressed and dirty in spots. Any props or costumes from this film are very hard to come by, and this would be the highlight to any AOD Collection.
  • Evil Sheila's Dress - Distressed medieval style dress screen used by Embeth Davidtz as "Evil Sheila". This torn and aged dress was screen used during the Deadites Attack to retrieve the Necronomicon.

Sold in July 2008


Men In Black II

Agent Kay, Agent Jay, and Frank Costumes

These trademarked suits were worn by Agent Kay (Tommy Lee Jones), Agent Jay (Will Smith), and Frank the Pug. Each suit was custom made for the actors and are iconic artifacts from the film.

  • Agent Kay's MIB Suit - This suit was worn on screen by Tommy Lee Jones as "Agent Kay" and is in very good screen used condition. The pants and jacket were custom made by John David Ridge and have labels with "Mr. Tommy Lee Jones" printed on them. The shirt was made for Mr. Jones by Anto of Beverly Hills and has a label that reads T.L.J. June 2001. This shirt has three tears on the back that are not visible when displayed with the jacket.
  • Agent Jay's MIB Suit - This suit was worn on screen by Will Smith as "Agent Jay" and is also in very good screen used condition. The pants and jacket were custom made by John David Ridge and have labels with "Mr. Will Smith" printed on them. Both the jacket and pants have small holes for his wire harness to pass through and both pieces have "Harness" written in ink next to the labels. The shirt was made for Mr. Smith by Anto of Beverly Hills and has a label that reads W.S. June 2001, below that is FC written in ink.
  • Frank the Pug's MIB Suit - This uniquely crafted tiny suit was custom made for Frank the Pug and is one of only about two made for filming, however it is missing the buttons at the cuffs. The suit features a Velcro and snap closure along the belly.
  • MIB Rifles - These two rifles put the finishing touch to this set of costumes. Both rifles feature a silver paint scheme with futuristic detailing. Made of a heavy rubber these rifles were used for stunt work on the film and show signs of use with minor wear and scuff marks. The single barrel rifle measures about 39" long and the tri-barrel rifle measures about 31" long.

Sold in May 2008


Back To The Future 2

Marty's Future Nike

When Doc and Marty arrive in the year 2015, Doc asks Marty to put on clothes similar to Marty Jr. The first thing he puts on is the self lacing future Nikes. These shoes were originally created for a scene that was never filmed. It was first planned that Marty would take part in a non-gravitational game similar to racquetball. Because of this, some of the shoes were created with several lights mounted in the shoe so that it would assist in the illusion of hovering over the game floor. When it was deemed too expensive a scene, the light up shoes still got a small part when Marty initially puts them on along with when Marty walks in the dark. During the movie, when the laces are tightened, the Nike logo on the front lights up blue (as you can see in the picture). You get a chance to see all of the lighting on the side of the shoes on screen when Marty is walking on the sidewalk by the DeLorean in the dark.

It is believed that this may be one of only a couple of surviving light up shoes. This is the only known shoe to exist that has been wired to a control box to light again as it was on screen, except for one at Nike headquarters. Most of the remaining shoes were not created with the lighting capability.

Sold in November 2007


The Matrix Reloaded

Neo's Coat

According to an interview on whatisthematrix.warnerbros.com with Dan Bronson, the Costume Supervisor on the film, "...the coat that Keanu [Reeves, Neo] wears is made in seven different fabrics for very specific different scenes, due to the way each fabric flows and moves." This particular coat is a smoother cloth, and has no lining on the bottom half. Compared with some of the other heavier coats, this would allow better movement. There are several shots in the movie where Neo's coat seems smoother. As well, in some of the behind the scenes documentaries on the 10 disc Ultimate Edition, a member of the CGI team points out how they used one of Neo's coats to get every small detail. The cloth on this particular documentary looks like this coat. In another couple of behind the scenes shots, Neo has wires hooked up to him and the coat looks like a smooth one. Lastly, when promo shots were taken, Neo's coat again looks very smooth in the pictures.

This coat has several small cuts around the waist and inside the pockets. There is one large cut across the front below the waist area that was repaired during the film. The coat is in great screen used condition. This coat was made for the character "Neo", though we do not know if Keanu Reeves or a stuntman wore it. It may have been used in both The Matrix Reloaded and The Matrix Revolutions, as they were filmed back to back.

Sold in May 2007


Freddy Vs. Jason

Freddy and Jason Costumes

These are the main costumes worn by Robert Englund (Freddy Krueger) and Ken Kirzinger (Jason Vorhees) respectively in the ultimate standoff between Horror's most iconic slasher characters. These trademark costumes consist of the following:

  • FREDDY - striped sweater and pants
  • JASON - jacket, sweater, undershirt and pants

Both, Jason and Freddy have since their first outings (1980/1984) enjoyed a loyal following by fans & collectors alike. Many years in the making, "Freddy vs. Jason" ended up being the most succesful film for either of the 2 hugely popular horror franchises ("A Nightmare On Elm Street" & "Friday, the 13th"). A very important costume lot for horror collectors, this represensts a fantastic and incredibly rare opportunity to obtain the most important artifacts pertaining to both main characters of this blockbuster.

Sold in December 2006


Sleepy Hollow

Headless Horseman's Hero Costume

This is the complete hero costume worn in the beginning of the movie by Christopher Walken as "The Hessian Horseman" (Headless Horseman).

  • Upper Garment - This is a very intricately designed top with lots of detail and distressing to make it look worn. It zips in the back, and has extra padding inside in areas to make it look more muscular. This piece has the residue left where a label was placed that matches the labels in the pants and boots.
  • Pants - These pants have some distressing to them in order to make them look worn. There are some buttons and hooks which may have been used with braces or suspenders. The label inside states "CHRIS W HESSIAN #1".
  • Belt - The belt, complete with buckle, is distressed and scratched up from screen use.
  • Gloves - Both gloves were made for Christopher Walken and have his name typed onto the label on the inside of both.
  • Sword Scabbard - The sword scabbard is the only stunt piece to this ensemble. It was used by Ray Park in the stunt scenes later in the movie. It is made of a soft leather and bends easily without a sword inserted.
  • Cape - The cape is the hero cape used at the beginning of the movie by Christopher Walken. Compared to capes from the end of the movie, it is not at distressed, though it does have some rough edges around the bottom. The inside red lining is more vibrant for the beginning of the movie as opposed to later scenes.
  • Boots - Both boots have been distressed with a wax like coating to look well used. Each has a small label inside with "CHRIS-W" written on them. All buckles are intact.
  • Spurs - Probably the rarest pieces of this costume are the original spurs used by Christopher Walken on his boots. These are made of metal with a rubber spur, along with a leather strap with metal buckle. When the camera pans to a close up of him walking away, you can see the spurs bend if you go frame by frame, so they may have never even made a set of metal spurs.

Sold in January 2006


The Fifth Element

Futuristic Police Costume

This is a complete head-to-toe police uniform from the Luc Besson Sci-Fi cult film "The Fifth Element". Assembled on a mannequin it stands about 6 feet tall, 26" wide, 20" deep, and weighs less than 50 pounds. It is made of a canvas type textile material, fiberglass, plastic, metal & rubber.

This particular helmet has a rare opening visor that is functional (mechanically opens via a wire) and the round white front panel lights up (via a battery pack embedded in back of the costume), as does the red light on the shoulder. It also comes complete with all the accessories seen in the film, such as the massive shoulder gun, baton and police shield. The numbers on the helmet and shield match up to each other, and also represent the police squad in the space port. This particular gun (blue) was used for the police costume when Zorg was demonstrating his ZF-1 weapon, and also used by the ships crew towards the end of the movie.

Sold in May 2006


Donnie Darko

Frank the Rabbit's Head

This is Frank the Rabbit's head used on screen by James Duval as "Frank". This is the exact one seen on screen and matches perfectly down to the marks on the face and head, chipped teeth, and bent ears. It is incredibly difficult to find props and wardrobe from this fantastic cult film. Along with a ScreenUsed COA, this piece also comes with an impeccable signed letter from the Vice President of Post Production on Pandora letterhead.

Sold in April 2006


Fight Club

Tyler Durden's Red Jacket & Pants

This is the red leather jacket and dark blue pants that Brad Pitt wears as "Tyler Durden". He is wearing these together in the infamous first fight scene outside the bar. He then wears it later with a different pair of pants. The jacket is in great screen used condition with several marks on it and a broken button. We understand that this jacket and pants are the only ones personally selected by Brad Pitt and the Costume Designer (Michael Kaplan) from a vintage 70's clothing store - so there were no duplicates. The red jacket was replicated for other scenes, but this is the original. Along with our ScreenUsed COA, it comes with a signed COA from 20th Century Fox Archives (one for the coat and one for the pants).

Sold in September 2005


X2: X-Men United

Wolverine's Claws

This is a resin claw with metal reinforcement used on screen by Hugh Jackman as Wolverine. It comes with a signed letter of authentication from the Producer of the movie, along with a COA from ScreenUsed. We have noticed a small hairline crack in one of the tips by the knuckles, as can be seen in the close up photo. This is normal with a piece like this that was screen used.

Sold in August 2005


Back To The Future 2

Flying Luxor Cab

Based on a 1972 Citroen DS, the Luxor Cab was designed by John Bell of ILM and built by Mike Sheffe of Wonderworks. This is a full sized running car. The car is now being taken care of in Holland, and there was even a documentary video created including interviews with John Bell and Michael Scheffe.

Sold in 2003